800 m2 of retail space in Anzegem
12,000 products in stock
professional service
pay safely
LED module orange position light DRL "American" Volvo FH5 - VOLVO
Limited stock
Ref.: 03404009
The American kits only consists of two yellow emitter for the bottom line of the DRL. The original in the top will not be replaced. The emitters are designed for optimal durability, with powerful high power LEDs placed on aluminum PCBs, while the original are standard PCBs. The aluminum increases the heat transfer to the heat sinks and ensures maximum life span of the LEDs. The original connectors are used on all emitters, so connecting them is straight-forward. Each set contains 2 emitters and thermal paste for the mounting. There is 1 emitters for each side. Notice that the emitters are not e-approved. Mounting is done in this way: Tilt the cab Remove plastic covers behind the headlights Remove the heatsinks from the headlights Remove the connectors from the original emitters. Remove the emitters from the heat-sinks (with small screw driver or knife) Remove and clean the thermal paste / grease, so the surface is completely clean. Add the included thermal paste in a thin even layer, where the emitter is to be placed. Push the new emitter completely down on the heat sink Bend the wings on the board, marked with arrows, so that the board is fastened to the heatsinks Connect the emitters Mount all parts again
