800 m2 of retail space in Anzegem
12,000 products in stock
professional service
pay safely
LED EXTRA module orange for position light Scania R/S NG - SCANIA
To order
Ref.: 03398554
Especially developed emitters for Scania +2016 with LED HEADLIGHTS! A total of 30 bright LEDs completely lights up the reflector, which creates a very special effect in an otherwise dark headlight. They are a great addition to any Scania headlights, regardless if you have standard white, yellow or warm white DRL. Mounting them is easy, and the only permanent change in the headlight is a single hole, that is easily closed again. The emitters are mounted inside the headlight, and fastened with two existing screws. MOUNTING: There is 3 meter wire on each emitter, that can be connected to the existing position light / marking light. There are two screws near the doors, that hold the headlights in place. They are loosened, where after the headlight can be swung to the side. On top of the headlight is a large cap, that can be loosened and removed. Under the cap is a large heatsink. The two front screws on the heatsink are loosened and removed. Push the emitter sideways in to the headlight so that the two taps fits the holes in the heatsink. It is important that the emitter is placed above the reflector. You should not be able to see the emitter inside the headlight when it is mounted. The two screws is fastened through the emitters in to the heatsinks. We recommend that you drill a hole in the back plate of the light for feeding through the wire. Two PG7 cable glands are included, and they fit a 12.5mm hole.
